ESSMA Sine Wave Home UPS is powered by Digital Signal Processing (DSP) Technology. By which we would bring you pure sine wave output along with synchronized change over. The pure sine wave output is as smooth as the utility power.
Now your sensitive electronic equipments can be protected with ESSMA Sine Wave UPS, great for audio & research equipment that is particularly sensitive to the background noise created by generator or ordinary inverter power.
| Capacity (KVA)
| 1 / 2 3/5 5/7.5
48V 72V 120V
192 / 240V / 360V
415V ±15% -25%
at 0.8 typical
415V 15% -25%
Voltage / Regulation
Full Load Current
Static Voltage Regulation
Dynamic Voltage Regulation
Total Harmonic Distortion
|Single / Three
Rated at 0.8 p.f.
50Hz 0.5 Hz
125% for 10 Minutes & 150% for 1 Minute
6% for 50% step load change
1 % of Nominal for all variations of Line Load
10% for 10% to 100% step load change
For Linear loads 2.5%. For Non linear loads 5%
85% to 93% on full load depending on capacity
1 : 3
| Input circuit breaker, Charger over voltage,
Charger over current limit.
Battery low cut off / Current limit, HRC fuse in battery path, Battery over charger trip.
Output over voltage / Over load trip
Current limit, Short Circuit.
| Phase failure,
Abnormal Phase sequence
| Main ON , UPS ON, UPS Trip, UPS OV IUV, Battery Low trip,
Alpha numerical display
Output Voltmeter, Output Ammeter
|Environ.|| Operating Temperature Range
Max. Operating altitude without Derating
|O°C to 40°C
950% non condensing
Manuall static By Pass I PF correction I Remote display I Control Software I SNMP compatibility